Printer not turning On

✅ Step 1: Check Power Connection

Ensure the power cable is firmly plugged into both the printer and wall socket.
If using a power adapter, check both ends (to the printer and to the wall).
Try a different wall outlet.

✅ Step 2: Check Power Switch

Ensure the power switch is in the “ON” position.
Some models have the switch in an inconspicuous location (back or side).

✅ Step 3: Look for Lights or Sounds

If no lights or sounds occur:
- Unplug everything
- Wait 10 seconds
- Reconnect only power cable and turn on
If there’s still no response, continue to next step.

✅ Step 4: Try Another Power Cable or Adapter

The power cable or adapter may be defective.
If possible, test with a known-working compatible adapter (check voltage & amp rating).

🧪 Additional for Zywell Printers:

Some Zywell models have a reset switch near the power port—press with a pin if available.
Ensure no burn smell or overheating on the adapter.
Try disconnecting the USB/Ethernet cable during startup.

🧪 Additional for Epson Printers (e.g., TM-T88 series):

Try holding the Feed button while turning it on. If it prints a test page, the issue may be communication, not power.
If using a power brick, verify LED on the brick itself (if available).
Try a full power reset:
- Disconnect power cord
- Hold Power button for 10 seconds
- Reconnect power and try again

⚠️ If Still Not Turning On:

Swap to a different printer station or power outlet.

Maximize Efficiency
- Boost Sales Now!

Maximize efficiency with intuitive tools that simplify operations, automate tasks, and provide real-time insights. Drive growth with data-driven decisions, seamless integrations, and a scalable system designed to evolve with your business.